Call Toll Free: 1-866-928-0567Email: info@conntrol.com

These switches can be mounted on a heavy gauge steel base plate or a guard, both of which provide separation barriers to deter simultaneous pedal operation.

FEATURES:
  1. Solid steel construction, with full cover and base pads
  2. The 892 features a cable clamp that is located inside the foot switch
  3. Redundant corrosion-resistant spring system
  4. High strength socket head hinge screws
  5. All threaded openings are extruded to provide extra thread engagement
  6. Two mounting holes
  7. Capable of handling up to 14/3 cord
  8. Quick-connect terminals required
  9. Long life snap switch
  10. #8 grounding screw is provided
  11. High quality, black E-coat
  12. A fiberglass sleeve is supplied to comply with UL requirements for strain-relief of thermoplastic jacketed cord
  13. #892 Series is UL listed to U.S. and Canadian safety standards
  14. Ingress protection rating: NEMA Type 1 enclosure
  15. Optional guards, oversize guards and stainless-steel guards available.
Custom Foot Switches

The 892 can be provided with special nameplates, cord sets, plugs, and other features that may be required for specific applications. Please consult factory.

WARNING: It is the responsibility of the user to determine the suitability of a foot switch for the intended use and to determine that it will comply with all Federal, State, and Local safety and health regulations.
Unit of Measure

Specifications

Action

N/A Momentary

Description

N/A Single Switch with cord set

Cord Set

N/A 6' 18/3 SJT with leads stripped

Rating

N/A 10 AMP, 1/3 HP, 125/250 VAC

Dimensions

N/A 2-3/4”W, 3-5/8”L, 1-1/2”H

Weight

N/A 1 lb.

Certifications

N/A
 

Features

N/A

  1. Solid steel construction, with full cover and base pads
  2. The 892 features a cable clamp that is located inside the foot switch
  3. Redundant corrosion-resistant spring system
  4. High strength socket head hinge screws
  5. All threaded openings are extruded to provide extra thread engagement
  6. Two mounting holes
  7. Capable of handling up to 14/3 cord
  8. Quick-connect terminals required
  9. Long life snap switch
  10. #8 grounding screw is provided
  11. High quality, black E-coat
  12. A fiberglass sleeve is supplied to comply with UL requirements for strain-relief of thermoplastic jacketed cord
  13. #892 Series is UL listed to U.S. and Canadian safety standards
  14. Ingress protection rating: NEMA Type 1 enclosure
  15. Optional guards, oversize guards and stainless-steel guards available.

^